No More Scale is designed to reduce and soften scale formation on both pool interiors and Salt Chlorinator Cells.
Use of No More Scale has many advantages including:
- Phosphate Free – does not contribute unwanted phosphates like alternative products.
- Prevents metal staining.
- Prevents corrosion of pool heating equipment.
- Prevents scum deposits on pool surfaces.
- Prevents plugging of filters.
GENERAL INSTRUCTIONS
1. No More Scale should be added at the start of the season during spring open up.
2. Calculate the required amount of No More Scale from the dose rate below.
3. Ensure that the pump and filter are running as normal.
4. Mix the calculated dose in a clean bucket with water and evenly distribute around the pool. DO NOT ADD VIA THE SKIMMER.
5. Filter as normal.
DOSE RATES
INITIAL & FINAL: 500mls per 50,000 litres of pool water.
MONTHLY MAINTENANCE: 100ml per 50,000 litres of pool water.
After the Initial Dose has been added continue to apply the product on a monthly basis to ensure constant scale protection all year round. To remove scale discolouration on waterline tiles, raise the water level above the waterline
level and maintain for at least 3 weeks. A final treatment is recommended when the pool is winterised or will be idle for a long period of time. The main causes of scale formation are generally high levels of calcium and poor water balance,
metal stains form due to incorrectly balanced water.
Use of No More Scale has many advantages including:
- Phosphate Free – does not contribute unwanted phosphates like alternative products.
- Prevents metal staining.
- Prevents corrosion of pool heating equipment.
- Prevents scum deposits on pool surfaces.
- Prevents plugging of filters.
GENERAL INSTRUCTIONS
1. No More Scale should be added at the start of the season during spring open up.
2. Calculate the required amount of No More Scale from the dose rate below.
3. Ensure that the pump and filter are running as normal.
4. Mix the calculated dose in a clean bucket with water and evenly distribute around the pool. DO NOT ADD VIA THE SKIMMER.
5. Filter as normal.
DOSE RATES
INITIAL & FINAL: 500mls per 50,000 litres of pool water.
MONTHLY MAINTENANCE: 100ml per 50,000 litres of pool water.
After the Initial Dose has been added continue to apply the product on a monthly basis to ensure constant scale protection all year round. To remove scale discolouration on waterline tiles, raise the water level above the waterline
level and maintain for at least 3 weeks. A final treatment is recommended when the pool is winterised or will be idle for a long period of time. The main causes of scale formation are generally high levels of calcium and poor water balance,
metal stains form due to incorrectly balanced water.
